There is an unexplained great feeling that comes with investing in a good pair of shoes. However, this exhilaration can be cut short by a stubborn stain or unexpected damage. The truth is, with every step we take in a pair of shoes, they are exposed to conditions that could damage them. It could be a spill of ketchup during lunch, a dirty puddle by the driveway, accumulated salt on the streets during winter, or even unexpected downpour.
While we may not have control over these mishaps, we can protect our shoes and extend their lifespan using water resistant shoe spray. A waterproofing spray will keep your shoes in good condition by repelling water and avoiding stains.
Though there are hundreds of waterproofing sprays in the market, not all are good. If you just learned about waterproofing products, It might be challenging to know what is the best water and stain repellent for shoes.
We are here to help. We will ease the process for you by reviewing the best waterproofing sprays in the market. We will also highlight the features you should look out for before you buy best suede waterproof spray.
Best Waterproofing Sprays for Shoes
Crep Protect – Ultimate Rain and Stain-Resistant Barrier
Protect your favorite pair of boots and give them a longer life with Crep protect. True to its name, Crep spray will give your shoes ultimate protection against different environmental conditions. This shoe rain protector is suitable for all your leather, linen, nubuck, canvas and suede shoes.
In addition, the protective spray creates an invisible barrier that repels liquids and prevents stains. Also, it adds a stain-fighting resin on the treated surface to protect stain and dust.
This protector is easy to apply and quick to dry. For best results, two coats are recommended. However, if you live or work in places where you are not likely to encounter snow or mud puddles, one coat is enough.
Usually, an application lasts for about two weeks. Beyond that, it is not as effective. Always re-apply on time for ultimate protection.
- Easy to use
- Suitable for suede, canvas, and nubuck
- No discoloring
- Dry’s quickly
- Total protection against stains
KIWI Boot Waterproofer: Water Repellent for Hunting, Hiking and Outdoor Boots
You have probably used kiwi shoe polish for your shoes at some point in time. You bear me witness that quality is their strong suit. The same excellent quality applies to the Kiwi boot waterproofer.
Kiwi waterproofer provides strong silicon protection for outdoor and work boots. It contains a special formula that penetrates leather and fabric, creating a strong water barrier still allowing the fabric to breathe.
The only drawback is that silicon can discolor brightly colored shoes. It is advisable to spot test the boot waterproofer before applying to the whole item. Also, you should apply the protector in a well-ventilated area as it has a strong unpleasant smell.
Here is how to waterproof shoes using Kiwi waterproofer:
Hold the can upright 7-10 inches away from the shoe and evenly spray the entire surface. Allow the shoes to dry for about for hours before applying the second coat. Let the shoes sit for one to two days before wearing them.
- Silicon protection for repelling water
- Allows breathability
- A strong, unpleasant scent
Star Brite Waterproof Spray for Shoes: Waterproofer, Stain Repellent, and UV Protection
Protect your outdoor and marine fabrics with Star Brite waterproof spray for shoes. You can also use it on your boat and car covers, jackets, backpacks, awnings, boots, among others. This spray is especially suitable for new fabrics as it provides a barrier against moisture and UV rays, thus extending their service life.
Star Brite penetrates the fabric making it highly resistant against the harshest weather condition. Also, the spray contains UV rays inhibitors that protect the fabric from sun damages and fading. The spray also provides a protective polymer barrier coating that helps to repel dust and stains.
This spray is not water-based; it is therefore not recommended for laminated, coated, backed, or glued with adhesive fabrics. If you are material type, kindly inquire before application.
The only drawback of this product is the sprayer. It is easy to assume the sprayer is faulty as it does not start on the first pump. You need ten or more pumps before it can spray.
- Complete protection from water
- Protect fabric from UV rays and avoids fading
- Polymer barrier that helps repel dust and stain
- Used for all outdoor and marine fabrics
- The sprayer requires many pumps to start.
Nikwax Tx.Direct Spray-On Waterproofing
Add an extra layer of protection to all your waterproof outwear, such a boot, raincoats, and ski jackets with Nikwax Tx direct spray. This spray is best for already waterproof laminated and synthetic materials.
This waterproofing spray has two primary functions: to add an extra layer of protection to waterproof garments and boots and to provide water repellency and reinforce the breathability of your outwear.
Unlike other waterproofing sprays, Nikwax Direct spray is water-based and inflammable. Also, it does not contain dangerous organic compounds.
However, this spray has a strong vinegar smell. You can only use it in a well-ventilated room or outside. The vinegar scent is still present after drying, but you can only smell it if the shoe is close to your face.
Although the application is easy, the spray bottle tends to drip. To prevent dripping, hold the bottle in an upright position.
- Add an extra layer of protection to waterproof materials
- Boost water repellency
- Reinforce breathability
- Water-based and inflammable
- Strong vinegar scent
Tarrago High Tech Nano Protector Spray
If you are looking to keep your leather boots in good condition or restore your shoes and bags, consider Tarrago high tech Nano protector spray. With its natural formulas, you are guaranteed of a mirror finish. It can be used on all your leather apparel, including suede, nubuck, and smooth leather. However, it is not safe for metalized and latent leather.
This protector spray uses a nanotechnology and lotus flower effect for ultimate protection. Confused? Let me explain;
Nanotechnology means that after applying the protector, some protective elements (nano elements) cover the fibers and the material become more dirt and water repellent and still allow breathability. On the other hand, Lotus effect creates an invisible layer that ensures water or other liquids don’t remain on the surface. When the liquid hits the surface, it beads up and rolls to the ground.
For best results, shake the sprayer well before application. Spray evenly over a clean surface. Also, Position the sprayer at least 30cm away from the shoe.
- Nanotechnology for complete water repellence
- Lotus effect of making water slides from the surface
- Allows breathability
4 Important Features to Consider In a Shoe Protector Spray
To determine how effective a shoe protector spray is, check on its ability to prevent water from penetrating your shoes. If even after application of the protector water penetrates, wetting your socks and staining your shoes, then that shoe protector is not effective.
2. Suitable Material for Application
It’s important to know that not all shoe protectors are versatile. Some protectors can only be used for specific materials. Before you buy any product, make sure you know the type of material you intend to work on. For instance, if you intend to waterproof your new suede loafers, you should go for a suede shoe protector.
If the material is not familiar, please ask the manufacturers. Also, check at the product page or can verify which material it’s suitable for.
Nothing is worse than ruining boots while trying to protect them. It is, therefore, essential to find out if the shoe protector spray you intend to buy discolors shoes. Unfortunately, many protector sprays add a permanent unwanted color on your shoes. It is also true that not many manufactures would openly confess their products can discolor shoes.
So how do you know if your protecting spray discolors shoes?
Read Products and Costumes review of the product before you buy it. If you have already bought, try the protector on a small part of your shoe to verify if it discolors.
Spray protectors are made from a mixture of chemicals. The end product comes with an unpleasant smell and sometimes too unpleasant. However, the unpleasantness disappears if you apply the protector in a well-ventilated room. If you are allergic to strong smells unpleasant or not, you might need to pass on some products. Again, Product reviews will help you know which ones.
Like the adage goes: prevention is better than cure. Do not wait for your shoes to get stained or ruined by water while you can do something about it. The cure here may be very costly as you may need to buy a new pair of shoes.
We trust you now have enough knowledge about the best waterproofing sprays and how to choose the best. By using waterproofing sprays, you will not only save your shoes that money that would have been spent buying another pair of shoes.